How To Set Up Roomba 600 Series

iRobot Roomba 600 Series Robot Floor Vacuum Cleaner

Important Safety Instructions

This owner's guide includes information for Roomba vacuum cleaner Model(due south): 670-679 and 690-699.Relieve THESE INSTRUCTIONS

Warning:
When using an electrical appliance, basic precautions should e'er be followed, including the following:

READ ALL INSTRUCTIONS Earlier USE

Warning:
To reduce the run a risk of injury or impairment, read and follow the condom precautions when setting upward, using and maintaining your robot. This apparatus tin be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they accept been given supervision or teaching apropos apply of the apparatus in a condom manner and empathise the hazards involved. Children shall not play with the apparatus. Cleaning and user maintenance shall not be made by children without supervision.This is the prophylactic alert symbol. It is used to alarm you to potential physical injury hazards. Obey all rubber messages that follow this symbol to avoid possible injury or death.

General

Your robot is not a toy. Minor children and pets should be supervised when your robot is operating.
Do not sit or stand on your robot or Dwelling house Base.
Do not utilize unauthorized chargers. Use of an unauthorized charger could cause the battery to generate heat, fume, grab ﬁre, or explode.
our robot comes with a region-approved power supply cord and is designed to exist plugged into a standard household Air conditioning ability outlet only. Do not use any other power supply cord. For replacement cords, delight contact Customer Care to ensure proper option of country speciﬁc power supply cord.
Practise not open your robot except every bit instructed to install or supplant the battery or maintain the dust bin and ﬁlter(due south). Do no open the integrated dock-charger, known as Dwelling house Base. In that location are no user-serviceable parts inside. Refer servicing to qualiﬁed service personnel.
Risk of electrical shock, use indoors in dry out location only.
Practise not handle your robot or Dwelling house Base with wet hands.
Shop and operate this product in room temperature environments only.
If the room to be cleaned contains a balcony, a physical barrier should be used to forestall access to the balcony and ensure safe operation. For more data, visit www.irobot.com/Roomba600
Do not operate the robot in areas with exposed electric outlets in the ﬂoor.
If the robot passes over a power string and drags information technology, there is a chance an object could exist pulled off a table or shelf. Before using the robot, pick up objects like clothing, loose papers, pull cords for blinds or curtains, power cords, and any fragile objects.
Exist aware that the robot moves on its ain. Take care when walking in the surface area that the robot is operating in to avoid stepping on it.
Do not use the robot to choice upward sharp objects, glass, or anything that is burning or smoking.
This robot is intended for dry ﬂoor use only. Practise not use the robot to pick upward spills. Exercise not allow your robot or dirt disposal to get wet.
Practice non identify anything on top of your robot.
The failure to maintain cleanliness of charger contacts could result in loss of ability for the robot to charge the battery.
Before running your robot on carpets or rugs, ensure that the carpets or rugs are compatible with vacuums using confined or brushes. Using your robot on a rug or carpet that is not uniform could effect in damage to your carpet or rug. Contact your carpet or carpet manufacturer with questions on compatibility.

Dwelling BASE

If the apparatus is non working equally it should, has been dropped, damaged, left outdoors, or dropped into water, return information technology to a service center
Ever disconnect your robot from the Home Base of operations earlier cleaning or maintaining it.Use only as described in this homo-ual.
Only use the battery charger model 17070 to accuse the iRobot model 1800LI battery, Battery Charger model 17070: Input Ac 100-240 VDC, 50-60 Hz, Output 20.5 VDC, i.25A. Only charge one of the post-obit iRobot batteries: maximum 14.4V, max 2000mAh Ni-MH or maximum 14.4-14.8V, max 3300mAh Li-ion bombardment. Other blazon of batteries may burst causing injury. Always contact Customer Care for the correct replacement of your bombardment.
The product may not be used with any type of power converter. Use of power converters volition immediately void the warranty.
If you live in an area prone to electrical storms, it is recommended that you use additional surge protection. Your robot's Home Base of operations may be protected with a surge protector in the event of severe electrical storms.

Bombardment

Do not open, crush, heat in a higher place 176°F: eighty°C, or incinerate. Follow manufacturer's instructions.
Do not short-circuit the battery by allowing metal objects to contact battery terminals or immerse in liquid. Do not bailiwick batteries to mechanical daze.
Periodically inspect the battery pack for any sign of damage or leakage. Immediately stop using the battery if there are noticeable abnormalities, such as smell, heat, discoloration or deformity.
Do not charge damaged or leaking battery packs, exercise not allow the liquid to come in contact with skin or optics. If contact has been made, wash the affected area with copious amounts of h2o and seek medical advice. Place the bombardment in a sealed plastic handbag and recycle or dispose of safely according to local ecology regulations, or render it to your local authorized iRobot Service Center for disposal.
Battery usage by children should be supervised. Seek medical advice immediately if a cell or a battery has been swallowed.
The battery pack must be removed from the robot before recycling or disposal.
For best results, use only the iRobot Lithium-Ion Battery that comes with the robot.
For replacement, purchase identical iRobot battery or contact iRobot Customer Treat alternative battery options.
Exercise not utilize non-rechargeable batteries.
Always charge and remove the battery from your robot and accessories before long-term storage. This symbol on the battery indicates that the battery must not exist disposed of with unsorted common municipal waste. Equally the terminate-user, information technology is your responsibleness to dispose of the cease-of-life battery in your appliance in an environmentally sensitive manner equally follows:

returning it to the distributor/dealer from whom you purchased the production; or
depositing it at a designated collection point

The split up collection and recycling of finish-of-life batteries at the time of disposal will help to conserve natural resources and to ensure that batteries are recycled in a manner that protects human health and the environment. For more information, delight contact your local recycling office or the dealer from whom y'all originally purchased the product. Failure to properly dispose of end-of-life batteries may potentially consequence in negative effects on the environment and human health due to the substances in the batteries and accumulators.

About your Roomba

Using your Roomba

Positioning the Domicile Base
Place the Home Base in an open up, uncluttered area leaving the following distances around the Home Base:

At least 1.5 feet (0.five meters) on each side of the Home Base of operations
At least four feet (one meter) in front of the Home Base of operations, and at to the lowest degree 4 anxiety (ane meter) abroad from stairs
At least 8 anxiety (2.5 meters) from Virtual Wall Barriers

Ever keep the Habitation Base plugged in and make sure it is in an expanse with consequent Wi-Fi® coverage to allow Roomba to receive information via the iRobot HOME App.

Download the iRobot Dwelling house App and connect to Wi-Fi

Watch an overview video with instructions on how to ready-upwardly and use your Roomba
Set an automatic cleaning schedule (upwardly to 7 times per week)
Enable automatic software updates
Access to tips, tricks, and answers to commonly asked questions

Use Instructions

Turn your robot over and remove the bin insert and battery pull tabs. Turn your robot over and remove the bin insert and battery pull tabs.
Roomba has a fractional bombardment accuse, so it'south set up to start cleaning. Annotation: Roomba ships with a partial battery charge. If you get-go a cleaning wheel earlier charging the bombardment fully, Roomba may render to the Abode Base of operations to recharge sooner than it will during hereafter cleaning cycles. To fully charge the bombardment before the ﬁrst cleaning cycle, allow Roomba to charge on the Habitation Base for iii hours.
To begin a cleaning wheel, press CLEAN on the robot or in the iRobot HOME App.
Pre-ready your robot to automatically vacuum up to vii times per week using the Scheduling feature in the iRobot HOME App.
When Roomba returns to the Home Base after completing a cleaning cycle, it will play a serial of tones to indicate successful completion of the cleaning wheel.
To interruption Roomba during a cleaning cycle, press CLEAN. To resume the cleaning bicycle, press CLEAN over again.
To end the cleaning cycle and put Roomba in standby mode, printing and hold Clean until Roomba's indicators turn off.
To transport Roomba dorsum to its Home Base during a cleaning bike, printing Make clean and then (DOCK) on Roomba or press CLEAN on the iRobot Domicile App chief screen. This will end the cleaning cycle.
If Roomba encounters an surface area of high debris concentration, information technology volition move in a spiral motility to make clean the surface area more than thoroughly. When Roomba does this, the CLEAN button will blink.
To use SPOT Cleaning, identify Roomba on top of the localized debris and press
Ever store Roomba on the Home Base so it's charged and ready to make clean when you need it. If storing off of the Domicile Base, remove the battery ﬁrst and and then store Roomba and the battery in a cool, dry out place.

Battery and Charging
Charge Roomba using the Habitation Base. Indicator lights will turn off after 60 seconds to conserve free energy while Roomba is charging. Check status of the battery by pressing the CLEAN push to illuminate the Battery Indicator. Indicator will announced amber while the bombardment is charging and solid green when fully charged.

Accessories

The Dual Mode Virtual Wall Bulwark (optional accessory for all models)
The Dual Fashion Virtual Wall bulwark keeps Roomba in the places y'all desire to be cleaned — and out of the ones you don't.In betwixt cleaning cycles, yous can leave the device operating in its position on the ﬂoor. You lot can set your device to i of two modes to ﬁt your abode's cleaning demand Virtual Wall Style: When the switch is in the "up" position as a Virtual Wall. This means that you can gear up it to block openings of up to ten feet (three meters). It creates an invisible, cone-shaped barrier that only Roomba can see. This barrier gets wider as information technology gets farther from the device (refer to the illustration) Halo Mode:
When the switch is in the "down" position ( ), the device creates a protective zone that Roomba will not enter. This prevents Roomba from bumping into items you want to protect (east.g. a dog bowl or vase) or crossing into undesired areas (eastward.g. a corner or under a desk-bound). The Halo is invisible and reaches approximately 12 inches (30 centimeters) from the center of the device.

Regular Robot Care

Recommended Robot CareTo go along Roomba running at meridian performance, perform the following care procedures. Instructional care videos can also be viewed in the iRobot HOME App. If you find Roomba picking up less debris from your ﬂoor, then empty the bin, make clean the ﬁlter and clean the extractors.

Robot Part	Care Frequency	Replacement Frequency
Bin	After each use	–
Filter	Once per week (twice per week in homes with pets)	Every two months
Brushes	One time per calendar week (twice per week in homes with pets)	Every half dozen-12 months
Front Caster Wheel	Once every two weeks	Every 12 months
Side Brush Cliff Sensors Charging Contacts	Once per month

Note:
iRobot manufactures diverse replacement parts and assemblies. Buy replacement parts through the iRobot HOME App or by visiting world wide web.irobot.com/Roomba600. If you think yous need a replacement role, delight contact iRobot Client Care for more than information.

Emptying the Bin

Press the bin release button and pull to remove the bin.
Open bin door to empty bin.

Cleaning The Filter

Important:
Empty the bin before cleaning the ﬁlter. Pull the ﬁlter to remove. Tap the ﬁlter against the rubbish container to clear the droppings. Reinstall the ﬁlter.

Cleaning the Brushes

Open the brush guard by lifting both tabs
Remove and clean any hair and debris from the Brushes and brush bearings.
Reinstall brush bearings and brushes, close brush guard.Supersede the brushes every 6-12 months

Cleaning the Front Caster Bicycle

Pull ﬁrmly on the front cycle to remove from the forepart caster associates.
Remove whatsoever debris from within the bike cavity.
Spin the bicycle by hand. If the rotation is restricted, remove the wheel from its housing and push button ﬁrmly to remove the beam and clear any debris or hair wrapped effectually it.
Reinstall all parts when ﬁnished. Make sure the wheel clicks dorsum into identify.

Of import:
A forepart wheel clogged with pilus and debris could issue in ﬂoor harm.

Cleaning the Cliff Sensors and Charging Contacts
Wipe all sensors and charging contacts with a clean, dry out cloth.

Cleaning the Side Brush
Use a pocket-sized screwdriver to remove the screw. Pull the side brush to remove it from the robot. Remove any pilus and/or debris and reinstall the side castor.

Troubleshooting

Roomba will tell you something is wrong with a ii-tone distress sound followed by a spoken message. The troubleshooting indicator ( ) will also blink. More detailed back up and videos, are available through the iRobot Abode App as well every bit online. If the trouble is not resolved, visit www.irobot.com/Roomba600. Rebooting Instructions For some errors, rebooting Roomba may resolve the problem.

To reboot Roomba, printing and hold (DOCK) and (SPOT) buttons for 10 seconds until all indicators shut off, and so release. buttons for 10 seconds until all indicators shut off, then release.
When you release the buttons, you will hear an audible tone signifying a successful reboot.
Annotation:
If you use Roomba'south scheduling feature, open the iRobot HOME App after rebooting to conﬁrm that Roomba's schedule remains intact.

Reduced Ability Standby Style
Roomba consumes a small corporeality of power any time it is on the Dwelling house Base of operations to ensure that it is ready for its next cleaning task besides as to maintain Wi-Fi connectivity. Information technology is possible to put Roomba in a farther-reduced power state when non in use. For instructions and more than details on this Reduced Power Standby Mode, refer to the iRobot Domicile App.

Lithium-Ion Battery (available for select models)
Important:
Lithium-ion batteries and products that contain lithium-ion batteries are subject to stringent transportation regulations. If you demand to ship this production (with the battery included) for service, travel or any other reason, y'all MUST comply with the following shipping instructions:

Remove the lithium-ion battery from the product
Delight visit the iRobot Home App or world wide web.iRobot.com/Roomba600 to view an instructional video on how to remove the battery.
Place a slice of record over the bombardment'southward metal charging contacts
Reinstall the battery (with the tape on it) in the product and secure the battery door
Parcel the product in its original packaging or in your own packaging that prevents whatsoever motion during transportation
Transport via footing transportation only (no air shipping)

iRobot Customer Care

USA & Canada
If you have questions or comments about your Roomba, delight contact iRobot earlier contacting a retailer. Yous can also ﬁnd additional information such as maintenance tips and information about accessories on the iRobot HOME App or on our website at www.irobot.com/Roomba600.Should you nevertheless need aid, call our Customer Care squad at (877) 855-8593.
iRobot Client Care Hours:

Mon to Friday, 9AM – 7PM Eastern Fourth dimension
Saturday, 9AM – 6PM Eastern Time

Outside United states of america & Canada Visit global.irobot.com to:

Larn more than virtually iRobot in your country.
Get hints and tips to improve your Roomba'due south functioning.
Get answers to questions.
Contact your local support center.

Regulatory Information

FCC STATEMENT

Ezoic

This device complies with office 15 of the FCC Rules.
Functioning is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.This device contains a license-exempt transmitter/receiver that complies with Innovation, Science and Economic Development (ISED) Canada's license-exempt RSS(s). Operation is subject area to the following two atmospheric condition: This device may not crusade interference, and this device must accept any interference, including interference that may crusade undesired operation of the device.

Changes or modifications not expressly approved past iRobot Corporation could void the user'south authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Grade B digital device, pursuant to role 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if non installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference to radio advice will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which tin can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dissimilar from that to which the receiver is connected.
Consult the dealer or an experienced radio/Tv set technician for aid.
Under Industry Canada regulations, this radio transmitter may just operate using an antenna of a type and maximum (or bottom) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than than necessary for successful advice.
FCC Radiation Exposure Argument: This product complies with FCC §2.1091(b) for mobile device RF exposure limits, ready forth for an uncontrolled environment and is safety for the intended operation as described in this manual. Per FCC requirements, maintain a distance of more than than 8 inches (20cm) between whatsoever person and the host device (Roomba robot).
I SED Radiation Exposure Statement: This product complies with the Canadian Standard RSS-102 for portable RF exposure limits, set forth for an uncontrolled surroundings and is rubber for the intended operation as described in this manual. Per ISED requirements, maintain a altitude of more than 8 inches (20 cm) between any person and the robot.

Documents / Resources

Source: https://manuals.plus/irobot/roomba-600-series-robot-floor-vacuum-cleaner-manual